Epson Stylus Photo PX650 Service Manual page 77

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635

When installing the Middle Housing, pull out the Head FFC
from the point A and other cables from the point B. Be careful
not to damage the cables by letting them get caught.
Point B
Figure 4-33. Installing the Middle Housing (1)

When installing the Middle Housing, route the Head FFC
between the Front Frame and the Middle Housing.
Front Frame
Figure 4-34. Installing the Middle Housing (2)
DISASSEMBLY AND ASSEMBLY
Point A
Head FFC
Removal of Exterior Parts

When installing the Middle Housing, align the hooks (x2) of the
Front Frame Ground Plate with the hole of the Middle
Housing, and then slide it in the direction of the arrow to secure
the hooks. Make sure that the Front Frame Ground Plate
surely comes in contact with the Front Frame.
Front Frame
In contact with the Front Frame
Figure 4-35. Installing the Middle Housing (3)

Tighten the screws in the order given in

When installing the Card Slot Cover, align the positioning holes
of the Card Slot Cover with the dowels of the Middle Housing.
(See Figure 4-31.)

For routing the cables, see Figure 4-39(p.79).
Revision C
Front Frame Ground Plate
Align hooks (x2) with hole of
Middle Housing, slide it in the
direction of the arrow to secure.
Hook
Fig. 4-32.
77
Confidential