Overview; Banding Reduction System (Brs) Adjustment/Paper Feed Amount Profile (Pfp) Correction - Epson Stylus Photo PX650 Service Manual

Epson Stylus Photo PX650/TX650/TX659/PX660/PX660 Premium/Artisan 635
5.4 Banding Reduction System (BRS) Adjustment/
Paper Feed Amount Profile (PFP) Correction

5.4.1 Overview

This section explains how to carry out BRS/PFP adjustments.
C H E C K
To calculate the correction value by scanning the printed pattern
P O I N T
for BRS/PFP adjustment, be sure to prepare a specified scanner
beforehand. Before scanning, confirm that the document table is
free from any dirt or stain.
 Tools and paper required to perform the adjustment
Table 5-6. Tools and Paper for BRS/PFP Adjustment
Tools/Paper
Common PFP Base scale
Matte Paper-Heavyweight
BRS
Premium Glossy Photo Paper
PFP
 Specified Scanner to perform the adjustment

C A U T I O N
Install the driver of the scanner to the PC in advance.

As the profile required for the adjustment is not prepared for
scanners other than the ones specified in the following table, BRS/
PFP Adjustment can not be carried out by the other scanners.
The scanners that can be used for scanning the pattern in BRS/PFP adjustment is shown
in Table 5-7. When starting up the adjustment program, select the scanner to use.
Test Pattern Scanner
Figure 5-11. System Configuration
ADJUSTMENT
Product Code
1453980
---
(A4)
---
(4 x 6)
Calculate
correction
value
PC Printer

Banding Reduction System (BRS) Adjustment/Paper Feed Amount Profile (PFP) Correction

Table 5-7. Specified Scanner for BRS/PFP Adjustment
Model Name
Epson Perfection 4990 Photo
Epson Perfection V700 Photo
*
Epson Stylus Photo RX560/RX580/RX590
Epson Stylus Photo RX585/RX595/RX610/RX615
*
Epson Stylus Photo RX680/RX685/RX690
Artisan 800/Epson Stylus Photo PX800FW/TX800FW
Artisan 700/Epson Stylus Photo PX700W/TX700W
*
Epson Stylus Photo PX650/TX650/TX659
Artisan 810/Epson Stylus Photo PX810FW/TX810FW
Artisan 710/Epson Stylus Photo PX710W/TX710W
*
Epson Stylus Photo PX660/PX660 Premium
Artisan 835/Epson Stylus Photo PX820FWD/TX820FWD
Artisan 725/Epson Stylus Photo PX720WD/TX720WD
Epson WorkForce 630/635/Epsn Stylus Office TX620FWD/
*
BX625FWD/ME OFFICE 960FWD
Epson Stylus NX625/TX650WD/SX525WD/Office BX525WD/
WorkForce 625/ME OFFICE 900WD/WorkForce BX525WD/
*
WorkForce625/ME OFFICE 900WD
Epson Artisan837/Epson Stylus Photo PX830FWD
Epson Artisan 730/Stylus Photo PX730WD/TX730WD
*
Epson Artisan635
Note * : Use the internal scanner.
C H E C K
Depending on the sensor type of the scanner to use for the
P O I N T
adjustment, drying time required after the BRS adjustment
pattern has been printed differs. For PFP adjustment pattern/PFP
check pattern, drying time is not required.

For "CCD" sensor:
Printed pattern can be scanned straight away. (Drying time of
about 2 minutes is recommended.)

For "CIS" sensor:
Printed pattern needs to be dried more than 5 minutes.
Revision C
Epson
Epson
Stylus
Stylus
Photo
Sensor
Photo Artisan
PX660/
PX650/
type
PX660
TX650/
Premiu
TX659
m
CCD
O O
CCD O O
CIS O ---
*
CIS O ---
CIS O ---
*
CIS ---
O
*
CIS O ---
CIS
O O
*
CIS O O
* CIS
O O
CIS --- O
*
CIS --- O
*
CIS --- O
CIS --- ---
CIS --- ---
*
CIS --- ---
*
CIS --- ---
CIS --- ---
Confidential
635
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
122