Drum Rotation Motor - Electrolux TC2 Service Manual

12.4.5 Drum rotation motor

After removing the covers from the two ducts, it is possible
to access the drum rotation motor.
Remove the belt tensioner spring.
Remove the screws which secure the front and rear motor
support brackets, rotate upwards and remove.
Rotate the entire motor block (motor + two fans) towards
the interior of the dryer, lift and remove (after removing the
drive belt from the fan
a. Replacing the belt tensioner roller / drive belt
1. Spacer
2. Belt-tensioner roller with incorporated spacer
3. Elastic ring
4. Belt in central position
5. Leave two grooves free on each side of the pulley
SOI/ADL 49/57 599 38 46-21