Removal Of The Front Panel Gives Access To; Capacitor (Heat Exchanger); Front Flap - Electrolux TC2 Service Manual

12.5 Removal of the front panel gives access to:

The capacitor (heat exchanger)
-
The flap door
-
The plinth
-
The door microswitch
-

12.5.1 Capacitor (Heat exchanger)

•
To open the flap door, push the button.
•
Turn the two red retainers downwards.
•
Extract the heat exchanger.

12.5.2 Front flap

•
Remove the screws which secure it to the front
panel.
To remove the gasket, extract it from its seat.
To access to the opening button, remove the
fixing screws inside the flap and release the upper
three anchor tabs.
• When re-fitting the panel in its housing, first ensure that the three anchor tabs are correctly
positioned, and only then tighten the screws.
Check that the flap latch, when closed, actions the lever of the microbox, otherwise the dryer will not be
powered.
SOI/ADL 50/57 599 38 46-21