12.3.2 Removal of the left-hand side panel gives access to:
The floating microswitch
-
The float
-
The pump
-
-
The door interlock
-
The steamer
•
Remove the work top.
•
Remove the screws which secure the side panel and
remove the panel (as described before).
The sump is located in the rear section of the base, and
contains the pump, the floating microswitch and the float.
•
Remove the two tubes from their couplings (the red
tube which fills the canister, and the transparent tube
through which water overflow is ducted back to the
sump when the canister is full).
•
Remove the screw (1) which secures the microswitch
support and insert a screwdriver into the two anchor
tabs which secure it to the sump.
•
Lift both parts simultaneously and slide the
microswitch support outwards.
12.3.3 Floating switch
•
Turn the support upside-down to access the floating
microswitch.
SOI/ADL
44/57
599 38 46-21