Delayed Start Button; Start / Pause" Button - Electrolux TC2 Service Manual

4.9 Delayed start button

Pressing this button it is possible to select, during the
programme selection phase, a delayed start.
On TC2 and TC3 models, the time varies up to 12 hours;
the time is displayed in the Display.
Every time the button is pressed, the time displayed
increases:
For the first two hours, the step is about half an hour
Later, the step is one hour
To cancel the delay, move the selector by one
position or press the button till the display is reset.
On TC5 models the time varies till max. 9 hours.
Push the button till the relative pilot lamp of the chosen
delay lights up.
This option must be selected in all models after selecting the programme and before pushing
START/PAUSE.

4.10 "START / PAUSE" button

Start
When a drying programme is selected with the selector, the icons of the three phases (drying, cooling, anti-
crease) light up and the LED START/PAUSE flashes.
After having selected the options, press this button to start the cycle; the relative LED remains lit.
Pause
If a drying cycle is being executed, pressing the START/PAUSE button, the dryer interrupts the cycle and is
in PAUSE mode; the relative LED flashes.
Pressing the START/PAUSE button, the drying cycle starts from the point at which it was interrupted.
SOI/ADL 11/57 599 38 46-21