802.1Q Vlan - Waters Network Systems GSM2109 Operating Manual

other information about the packet, such as the protocol.
5.24 – VLAN Configuration
1. Click Add to create a new VLAN group.
2. Enter the Group Name and VLAN ID.
3. Select the members of the VLAN group.
4. Click apply.
5. The VLANs will be displayed.
6. Use the Delete button to remove VLANs.
7. Use the Edit button to modify existing VLANs.

5.24.2 802.1q VLAN

The IEEE 802.1q specification covers tagged-based. Therefore, it is possible to create
a VLAN across devices from different switch venders. IEEE 802.1Q VLAN uses a
technique to insert a "tag" into the Ethernet frames. The tag contains a VLAN Identifier
(VID) that indicates the VLAN numbers.
From this menu, you can create a tag-based VLAN, and enable or disable the Generic
Attribute Registration Protocol (GVRP) protocol. There are 256 VLAN groups available
Waters Network Systems GSM2109/GSM1009-SFP User's Manual Page 66