Rate Limiting - Waters Network Systems GSM2109 Operating Manual

Click Apply to confirm the settings.
5.22

Rate Limiting

Rate limiting allows you to set up the bandwidth rate and packet limitation type per port.
Ingress Limit Packet Type – select the packet type to be filtered. The packet types
include all types of packets: broadcast/multicast/unknown unicast packets; broadcast/
multicast packets; broadcast packets only. The broadcast/multicast/unknown unicast
packets, broadcast/multicast packets and broadcast packets only used ingress
packets. The egress rate supports all types of packets.
All ports support port ingress and egress rate control. For example, if Port 1 is
10Mpbs, users can set its effective egress rate at 1Mbps and ingress rate is 500kbps.
The switch performs the ingress rate by packet counter to meet the specified rate.
Ingress – enter the port effective ingress rate. The default value is 0.
Egress – enter the port effective egress rate. The default value is 0.
Click Apply to confirm the settings.
Waters Network Systems
5.21 - Port Mirroring Screen
GSM2109/GSM1009-SFP User's Manual Page 63