Snmp V3 Configuration - Waters Network Systems GSM2109 Operating Manual

Managed switch with eight 10/100/1000base-tx ports plus one mini gbic slot for 1000base-sx or lx fiber or one 10/100/1000base-tx port
Table of Contents

Advertisement

To remove the community string, select the community string to be removed and click
Remove.
5.26.3

SNMP v3 Configuration

To configure the SNMP V3 function, the following tasks should be done. See Figure
5.31 – SNMP V3 Configuration Interface.
Configure the Context Table.
Assign the context name of the context table.
Click Add.
Click Remove to remove an unwanted context name.
Configure User SNMP v3 User Table.
User ID – Enter a user name.
Authentication Password – Enter an authentication password.
Privacy Password – Enter a private password.
Click Add to add the password.
Click Remove to remove an unwanted password.
Configure SNMP V3 Group Table.
Security Name (User ID) – assign the user name that you set up in user table.
Waters Network Systems
5.30 – Trap Configuration
GSM2109/GSM1009-SFP User's Manual
Page 73

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gsm1009-1sfp

Table of Contents