Port Control - Waters Network Systems GSM2109 Operating Manual

5.17

Port Control

In the Port Control menu, you can view port status for each port.
Port – select the port to be configured.
State - current port status. The port can be set to disable or enable mode. If the port is
disabled, it will not receive or transmit packets.
Negotiation - set auto negotiation status of port.
Speed - set the port link speed.
Duplex - set full or half-duplex mode of the port.
Flow Control – flow control function is Symmetric or Asymmetric in full duplex
mode. The default value is Disable.
Security – This port accepts only one MAC address when enabled.
Use Apply to save the configuration
Waters Network Systems
5.15 - Port Statistics Screen
GSM2109/GSM1009-SFP User's Manual Page 58