Table of Contents
Advertisement
Group Configuration
To edit the existing VLAN Group:
1.
Select the VLAN group in the table list.
2.
Click apply.
3.
You can change the VLAN group name and VLAN ID.
4.
Once you have made the changes, click apply to save the changes.
5.25
RSTP (Rapid Spanning Tree Protocol) Menu
RSTP is an evolution of the Spanning Tree Protocol and provides faster spanning tree
convergence once a topology change has been made. This switch supports both STP
and RSTP. The switch will auto detect the connected device that is running STP or
RSTP protocol.
5.25.1
RSTP Configuration
1. Spanning tree information about the Root Bridge can be viewed here.
2. Use this menu option to modify RSTP state. Remember to use the apply button to
save the configuration. The following lists information about spanning tree settings.
RSTP mode – RSTP must enabled before RSTP functions can be configured.
RSTP is disabled by default.
Priority (0-61440) - a value used to identify the root bridge. The bridge with the
Waters Network Systems
5.26 – Group Configuration Screen
GSM2109/GSM1009-SFP User's Manual
Page 68
Advertisement
Table of Contents
