[Security] Menu; [Security Password]; [Security Password Change]; [Display Setting] - Panasonic PT-DW740E Operating Instructions Manual

[SECURITY] menu

Select [SECURITY] from the main menu, and select the item from the sub-menu.
Refer to "Navigating through the menu" ( x page 51) for the operation of the menu screen.
f When the projector is used for the first time
Initial password: Press awsqawsq in order, and press the <ENTER> button.
f After selecting the item, press asqw to set.
Attention
f When you select the [SECURITY] from the main menu and press the <ENTER> button, entering a password is required. Enter the set
password and then continue operations of the [SECURITY] menu.
f When the password has been changed previously, enter the changed password, and press the <ENTER> button.
Note
f The entered password is displayed with * mark on the screen.

[SECURITY PASSWORD]

The [SECURITY PASSWORD] screen is displayed when the power is turned on. When the entered password is incorrect, the operation will be
restricted to the power standby < v > button, the <SHUTTER> button, and the <LENS> (<FOCUS>, <ZOOM>, and <SHIFT>) buttons.
1)
Press as to select [SECURITY PASSWORD].
r [SECURITY PASSWORD]
[OFF]
[ON]
Note
f The [SECURITY PASSWORD] setting is set to [OFF] at the time of purchase or when all the user data has been initialized.
f Change the password periodically that is hard to guess.
f The security password will be enabled after setting [SECURITY PASSWORD] to [ON] and turning the <MAIN POWER> switch to <OFF>.

[SECURITY PASSWORD CHANGE]

Change the security password.
1)
Press as to select [SECURITY PASSWORD
CHANGE].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD CHANGE] screen is displayed.
Note
f The entered password is displayed with * mark on the screen.
f An error message is displayed on the screen when the entered password is incorrect. Re-enter the correct password.

[DISPLAY SETTING]

Overlap the security message (text or image) over the projecting image.
1)
Press as to select [DISPLAY SETTING].
Chapter 4 Settings — [SECURITY] menu
Disables the security password entry.
Enables the security password entry.
2)
Press qw to switch [SECURITY PASSWORD].
f The setting will change between [OFF] and [ON] each time you
press the button.
3)
Press asqw and the number (<0> to <9>)
buttons to set the password.
f Up to eight button operations can be set.
4)
Press the <ENTER> button.
5)
Re-enter the password for the confirmation.
6)
Press the <ENTER> button.
ENGLISH - 89