Panasonic PT-DW740E Operating Instructions Manual page 39

f The <HDMI IN> terminal of the projector can be connected to an external device with a DVI-D terminal by using an HDMI/DVI conversion
cable, but some devices may not project the image properly or function properly.
f The <DVI-D IN> terminal supports single link only.
f For signals that the projector can project, refer to "List of compatible signals" ( x page 125).
f If you operate the projector using the computer with the resume feature (last memory), you may have to reset the resume feature to operate
the projector.
f When the SYNC ON GREEN signal is input, do not enter sync signals to the <SYNC/HD> terminal or the <VD> terminal.
f When the DVI-D signal is input, EDID setting may be required depending on the connected device ( x page 70).
Chapter 2 Getting Started — Connections
ENGLISH - 39