[Date And Time]; [Save All User Data]; [Off] - Panasonic PT-DW740E Operating Instructions Manual

[SYSTEM DAYLIGHT VIEW]
[FREEZE]
[SIDE BY SIDE] *
* Only for PT-DW740E

[DATE AND TIME]

Set the time zone, date, and time of the built-in clock of the projector.
To set time zone
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
To set the date and time manually
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
To set the date and time automatically
1)
Press as to select [DATE AND TIME].
2)
Press the <ENTER> button.
f The [DATE AND TIME] screen is displayed.
3)
Press as to select [ADJUST CLOCK].
4)
Press the <ENTER> button.
f The [ADJUST CLOCK] screen is displayed.
r [NTP SYNCHRONIZATION]
[ON]

[OFF]

Note
f To set the date and time automatically, the projector must be connected to the network.
f If synchronization with the NTP server fails just after [NTP SYNCHRONIZATION] is turned [ON], or if [NTP SYNCHRONIZATION] is turned
[ON] while the NTP server is not set, [NTP SYNCHRONIZATION] will return to [OFF].
f Access the projector via a web browser to set the NTP server. Refer to "[Adjust clock] page" ( x page 99) for details.

[SAVE ALL USER DATA]

Save the various setting values as a backup in the built-in memory of the projector.
1)
Press as to select [SAVE ALL USER DATA].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
Note
f The image setting registered in [USER LOGO] is not saved.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Switches the [SYSTEM DAYLIGHT VIEW] setting. ( x page 57)
Temporarily freezes video to be a still image. ( x page 73)
Switches to the two window display. ( x page 73)
Enables [NTP SYNCHRONIZATION].
Disables [NTP SYNCHRONIZATION].
3)
Press as to select [TIME ZONE].
4)
Press qw to switch [TIME ZONE].
5)
Press as to select an item, and press qw to
set the local date and time.
6)
Press as to select [APPLY], and press the
<ENTER> button.
f The setting of the time will be completed.
5)
Press as to select [NTP SYNCHRONIZATION],
and press qw to change the setting to [ON].
f The setting will change between [ON] and [OFF] each time you
press the button.
6)
Press as to select [APPLY], and press the
<ENTER> button.
f The setting of the time will be completed.
3)
Enter a security password and press the
<ENTER> button.
4)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
f [PROGRESS] is displayed while saving data.
ENGLISH - 83