Connections; Before Connecting To The Projector - Panasonic PT-DW740E Operating Instructions Manual

Connections

Before connecting to the projector

f Before connecting, carefully read the operating instructions for the external device to be connected.
f Turn off the power of all devices before connecting cables.
f Acquire any connection cable necessary to connect the external device to the system that is either not supplied with the device or not
available as an option.
f Video signals containing too much jitter may cause the images on the screen to randomly wobble or wafture. In this case, a time base
corrector (TBC) must be connected.
f The projector accepts video signals, S video signals, analog RGB signals (synchronous signals are TTL level), and digital signals.
f Some computer models are not compatible with the projector.
f Use a cable compensator when you connect devices to the projector using long cables. Otherwise the image may not display properly.
f Refer to "List of compatible signals" ( x page 125) for the types of video signals that can be used with the projector.
<S-VIDEO IN> terminal pin assignments and signal names
Outside view
(1) (2)
(3) (4)
<RGB 2 IN> terminal pin assignments and signal names
Outside view
(11) (15)
(6)
(1) (5)
<DVI-D IN> terminal pin assignments and signal names
Outside view
(24) (17)
(16)
(8) (1)
<HDMI IN> terminal pin assignments and signal names
Outside view
Even-numbered pins (2) to (18)
(2) (18)
(1) (19)
Odd-numbered pins (1) to (19)
Chapter 2 Getting Started — Connections
Pin No.
(1)
(2)
(3)
(4)
Pin No.
(1)
(2)
(3)
(10)
(12)
(13)
(14)
(15)
Pin No.
(1)
(2)
(3)
(4)
(5)
(6)
(9)
(7)
(8)
(9)
(10)
(11)
(12)
Pin No.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
Signal name
Ground (luminance signal)
Ground (color signal)
Luminance signal
Color signal
Signal name
R/P
R
G/Y
B/P
B
DDC data
SYNC/HD
VD
DDC clock
Signal name
T.M.D.S data 2-
T.M.D.S data 2+
T.M.D.S data 2/4 shield
―
―
DDC clock
DDC data
―
T.M.D.S data 1-
T.M.D.S data 1+
T.M.D.S data 1/3 shield
―
Signal name
T.M.D.S data 2+
T.M.D.S data 2 shield
T.M.D.S data 2-
T.M.D.S data 1+
T.M.D.S data 1 shield
T.M.D.S data 1-
T.M.D.S data 0+
T.M.D.S data 0 shield
T.M.D.S data 0-
T.M.D.S clock+
(4) and (9) are not used.
(5) - (8), (10), and (11) are GND terminals.
Pin No. Signal name
(13) ―
(14) +5 V
(15) GND
(16) Hot plug detection
(17) T.M.D.S data 0-
(18) T.M.D.S data 0+
(19) T.M.D.S data 0/5 shield
(20) ―
(21) ―
(22) T.M.D.S clock shield
(23) T.M.D.S clock+
(24) T.M.D.S clock-
Pin No. Signal name
(11) T.M.D.S clock shield
(12) T.M.D.S clock-
(13) CEC
(14) —
(15) SCL
(16) SDA
DDC/CEC
(17)
GND
(18) +5 V
(19) Hot plug detection
ENGLISH - 37