Table of Contents
Advertisement
r [ON-SCREEN DISPLAY]
[OSD POSITION]
[OSD DESIGN]
[OSD MEMORY]
[INPUT GUIDE]
[WARNING MESSAGE]
Note
f Even if [OSD MEMORY] is set to [ON], the cursor position will not be held when the <MAIN POWER> switch of the projector body is turned
<OFF>.
[BACK COLOR]
Set the color of the projected image when there is no signal input.
1)
Press as to select [BACK COLOR].
r [BACK COLOR]
[BLUE]
[BLACK]
[DEFAULT LOGO]
[USER LOGO]
Note
f To create the image for [USER LOGO], "Logo Transfer Software" included in the supplied CD-ROM is required.
[STARTUP LOGO]
Set the logo display when the power is turned on.
1)
Press as to select [STARTUP LOGO].
r [STARTUP LOGO]
[DEFAULT LOGO]
[USER LOGO]
[NONE]
72 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
[2]
Set the position of the menu screen (OSD) to the center left of the screen.
[3]
Set the position of the menu screen (OSD) to the bottom left of the screen.
[4]
Set the position of the menu screen (OSD) to the top center of the screen.
[5]
Set the position of the menu screen (OSD) to the center of the screen.
[6]
Set the position of the menu screen (OSD) to the bottom center of the screen.
[7]
Set the position of the menu screen (OSD) to the top right of the screen.
[8]
Set the position of the menu screen (OSD) to the center right of the screen.
[9]
Set the position of the menu screen (OSD) to the bottom right of the screen.
[1]
Set the position of the menu screen (OSD) to the top left of the screen.
[1]
Set the color of the menu screen (OSD) to yellow.
[2]
Set the color of the menu screen (OSD) to blue.
[3]
Set the color of the menu screen (OSD) to white.
[4]
Set the color of the menu screen (OSD) to green.
[5]
Set the color of the menu screen (OSD) to pink.
[6]
Set the color of the menu screen (OSD) to brown.
[ON]
Set hold for the position of the menu screen (OSD) cursor.
[OFF]
[ON]
Set display of the input terminal name currently selected in the position set by the
[OSD POSITION].
[OFF]
[ON]
You can set the display/hide of the warning message.
[OFF]
The entire projection area appears blue.
The entire projection area appears black.
The Panasonic logo is projected.
The picture registered by the user is projected.
The Panasonic logo is projected.
The picture registered by the user is projected.
No startup logo is projected.
2)
Press qw to switch [BACK COLOR].
f The setting will change among [BLUE], [BLACK], [DEFAULT
LOGO] and [USER LOGO] each time you press the button.
2)
Press qw to switch [STARTUP LOGO].
f The setting will change among [DEFAULT LOGO], [USER
LOGO], and[NONE] each time you press the button.
Hide quick links:
Advertisement
Chapters
Table of Contents
