[Load All User Data]; [Initialize]; [Service Password] - Panasonic PT-DW740E Operating Instructions Manual

[LOAD ALL USER DATA]

Load the various setting values saved as a backup in the built-in memory of the projector.
1)
Press as to select [LOAD ALL USER DATA].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
Note
f The projector will go into the standby status to reflect the setting values when [LOAD ALL USER DATA] is executed.

[INITIALIZE]

Return various setting values to their factory default settings.
1)
Press as to select [INITIALIZE].
2)
Press the <ENTER> button.
f The [SECURITY PASSWORD] screen is displayed.
3)
Enter a security password and press the
<ENTER> button.
f The [INITIALIZE] screen is displayed.
r Items that can be initialized
[ALL USER DATA]
[ENTRY SIGNAL]
[NETWORK/E-MAIL]
[LOGO IMAGE]

[SERVICE PASSWORD]

Used by a service person.
84 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
All setting items including [ENTRY SIGNAL], [NETWORK SETUP], [E-mail set up], and [USER LOGO] are
returned to factory default values.
The projector will go into the standby status to reflect the setting values.
Deletes all the setting values saved for each input signal.
To delete only a part of a registered signal, perform the procedure described in "Deleting the registered
data" ( x page 86).
Returns [NETWORK SETUP] and [E-mail set up] to factory default settings.
Deletes the image registered in [USER LOGO].
3)
Enter a security password and press the
<ENTER> button.
4)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.
4)
Press as to select an item to initialize.
5)
Press the <ENTER> button.
6)
When the confirmation is displayed, select [OK]
or [CANCEL], and press the <ENTER> button.