Panasonic PT-DW740E Operating Instructions Manual page 95

Descriptions of items
1 Page tab
Switches pages by clicking it.
2 [Status]
The status of the projector is displayed by clicking this item.
3 [Projector control]
The [Projector control] page is displayed by clicking this item.
[Projector status] page
Click [Status] → [Projector status].
Displays the status of the projector for the following items.
1 [PROJECTOR TYPE]
Displays the type of the projector.
2 [MAIN VERSION]
Displays the firmware version of the projector.
3 [POWER]
Displays the status of the power.
4 [SHUTTER]
Displays the status of the projector.
5 [LAMP SELECT]
Displays the setting status of [LAMP SELECT] ( x page 76).
6 [SERIAL NUMBER]
Displays the serial number of the projector.
7 [NETWORK VERSION]
Displays the version of the firmware of the network.
8 [REMOTE2 STATUS]
Displays the control status of the <REMOTE 2 IN> terminal.
9 [OSD]
Displays the status of the on-screen display.
10 [LAMP POWER]
Displays the setting status of [LAMP POWER] ( x page 77).
11 [INPUT]
Displays the status of the input selection.
Chapter 4 Settings — [NETWORK] menu
(1)
(2)
(3)
(4)
(5)
(2)
(3)
(4)
(5)
(6)
4 [Detailed set up]
The [Detailed set up] page is displayed by clicking this item.
5 [Change password]
The [Change password] page is displayed by clicking this item.
6 [CRESTRON RoomView]
The control page of RoomView is displayed by clicking this item.
12 [INTAKE AIR TEMPERATURE]
Displays the status of the air intake temperature of the projector.
13 [OPTICS MODULE TEMPERATURE]
Displays the status of the internal temperature of the projector.
14 [AROUND LAMP TEMPERATURE]
Displays the status of the temperature around the lamp of the
projector.
15 [LAMP1][LAMP2][RUNTIME]
Displays the status and the cumulative operating time (converted
value) of the lamp.
16 [SELF TEST]
Displays the self-diagnosis information.
17 [PROJECTOR RUNTIME]
Displays the operation times of the projector.
(1)
(6)
(7)
(8)
(9)
(10)
(11)
(12)
(13)
(14)
(15)
(16)
(17)
ENGLISH - 95