Remote control operation
Using the shutter function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image
temporarily.
button
1)
Press the <SHUTTER> button.
f The image disappears.
f This operation can be also performed using the <SHUTTER>
button on the control panel.
Note
f The power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter is closed.
Using the on-screen display function
Turn off the on-screen display function (no display) when you do not wish the viewers to see the on-screen display, such as the menu or the
input terminal name.
button
1)
Press the <ON SCREEN> button.
f The on-screen display disappears.
Note
f If you press the <MENU> button on the control panel for at least three seconds while the on-screen indication is off, the on-screen display is
turned on.
Chapter 3 Basic Operation — Remote control operation
2)
Press the <SHUTTER> button again.
f The image is displayed.
2)
Press the <ON SCREEN> button again.
f The on-screen display appears.
ENGLISH - 47