Drive Handling Instructions - Fujitsu ETERNUS DX200F Operation Manual

Chapter 4 Maintaining Optional Products
4.1 Installing Additional Drives
4.1.2

Drive Handling Instructions

■
About Condensation
■
About Static Electricity
Do
When moving a drive from a cold place, such as an unconditioned store house in
•
winter, to a warmer place such as an air-conditioned room, the severe temperature
change may result in condensation forming.
To avoid this, allow the packed drive sufficient time in the warmer place (one hour
for each 15°C of temperature difference) to adapt to the new temperature.
Do Not
Do not touch the surface of the board of the drives.
•
Do
• When handling drives, make sure to wear a wrist strap or touch a metal part to dis-
charge the human body's natural static electricity. Failure to discharge static elec-
tricity may cause device failure.
Leave the drive in its package until ready to install it.
•
30
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
P3AM-8472-01ENZ0