Figure 2.2 Off Position (Marked "¡") Of The Psu Switch Of A Power Supply Unit - Fujitsu ETERNUS DX200F Operation Manual

Chapter 2 Basic Operation
2.1 Powering On and Off
AC power is supplied to the ETERNUS DX and the POWER LED on the power supply unit blinks green.
POWER
LED
■
To Switch to OFF
Turn the PSU switch of the power supply unit to the OFF position (marked "¡").
This does not need to be turned off for normal operation.
Figure 2.2 OFF Position (Marked "¡") of the PSU Switch of a Power Supply Unit
Power supply unit (PSU#0)
Check that the POWER LED of the power supply unit is off.
Power supply unit (PSU#0)
Power supply unit (PSU#1)
FUJITSU Storage ETERNUS DX200F All Flash Array Operation Guide (Basic)
Copyright 2014 FUJITSU LIMITED
Power supply unit (PSU#1)
20
P3AM-8472-01ENZ0