Configuration - Waters Network Systems ProSwitch 2800M Operating Manual

Function name:
LACP System Priority
Function description:
Used to set the priority of the LACP system ID. LACP will only aggregate together the ports whose
peer link partners are all on a single system. Each system supports LACP will be assigned a globally
unique System Identifier for this purpose. A system ID is a 64-bit field comprising a 48-bit MAC
Address and 16-bit priority value.
Parameter description:
System Priority:
The System Priority can be set by the user. Its range is from 1 to 65535. Default: 32768
Hash Method:
DA+ SA, DA and SA are three Hash methods available for the Link Aggregation of the switch.
Packets will determine the path to transmit according to the mode of Hash chosen
Default: DA and SA
5.17 802.1x Configuration
802.1X port-based network access control provides a method to restrict users to access
network resources via authenticating user's information. This restricts users from gaining access
to the network resources through a 802.1X-enabled port without authentication. To access the
network through a port under 802.1X control, you must first input your account name for
authentication and wait to gain authorization before sending or receiving any packets from a
802.1X-enabled port.
Waters Network Systems
Figure 5.40 – LACP System Priority
2800M/MR User's Manual Page 79