Log - Waters Network Systems ProSwitch 2800M Operating Manual

5.25

Log

This function displays the log data. The switch provides system log data for users. There are
eighteen private trap logs and five public trap logs. The switch supports a total 120 log entries.
For more details on log items, please refer to Section 5.22 for Trap/Alarm Configuration and
SNMP Configuration.
Function name:
Log Data
Function description:
The Trap Log Data displays the log items including all SNMP Private Trap events, SNMP Public traps and user
logs occurred in the system. In the report table, No., Time and Events are three fields contained in each trap
record.
Parameter description:
No.:
Displays the order number of the traps.
Time:
Displays the time of the trap.
Events:
Displays the trap event name.
Auto Upload Enable:
Switch the enabled or disabled status of the auto upload function.
Upload Log:
Upload log data through tftp.
Clear Log:
Clear log data.
Waters Network Systems
Figure 5.75 – Log Data
2800M/MR User's Manual Page 115