Configuration - Waters Network Systems ProSwitch 2800M Operating Manual

Mobile Phone 1-6: Additional mobile phone numbers that would like to receive the alarm
message.
5.19

Configuration

The switch supports three copies of configurations, including the default configuration, working
configuration and user configuration for your configuration management. The three copies are
described below:
Note: If you make changes to the configuration, you must save the configuration before
rebooting the switch.
Default Configuration:
 The factory setting and cannot be altered. There are two restore default functions available.
The first is Restore Default Configuration which includes the default IP address
(192.168.1.1). The second is Restore Default Configuration without changing current IP
Address. This option will not change your current IP address.
Working Configuration:
 The working configuration is the current configuration and can be changed any time. The
configurations you are using are saved into this configuration file. This is updated each time
you click on Apply.
User Configuration:
 User configuration is the specified file for backup purposes and can be updated while
confirming the configuration. You can retrieve this configuration by performing Restore User
Configuration.
Waters Network Systems
Figure 5.49 – Alarm Configuration
2800M/MR User's Manual Page 90