Led - Waters Network Systems ProSwitch 2800M Operating Manual

3.6 LEDs
The following table provides the status and description of the LEDs:

LED

CPURUN
POWER
ACT
FDX
SPD
LNK
ACT/FDX/SPD
LNK
FB
ACT/FDX/SPD
Waters Network Systems
Color
System LED
Green
Green
Green
Green
Green
10/100Mbps Ethernet Port 1 to 8 of 3 Module LED
Green
Amber
(TP Port 1 to 8
of 3 module LED)
Green
(Fiber Port 1 to 8
of 3 module LED)
10/100/1000Mbps Gigabit TP/Fiber Port 25, 26 LED
Green
Green
Green
(Port 25,
26 LED)
Table 3.1 – LED Staus
2800M/MR User's Manual
Function
Blinks when CPU is on and good
Switch is receiving power
Lit when LEDSET set on active mode
Lit when LEDSET set on full-duplex mode
Lit when LEDSET set on speed mode
Port has established a valid link
Off when there is no connection
a. LEDSET set on ACT (active) mode:
Blinks when traffic is present
b. LEDSET set on FDX (full-duplex) mode:
Lit when full-duplex mode is active
Blinks when collisions are occurring
c. LEDSET set on SPD (speed) mode:
Lit when 100Mbps speed is active
Off when 10Mbps speed is active
Lit when connection with remote device is
good
Off when there is no connection
Lit when fiber port is active
Off when copper port is active
a. LEDSET set on ACT (active) mode:
Blinks when traffic is present
b. LEDSET set on FDX (full-duplex) mode:
Lit when full-duplex mode is active
Blinks when collisions are occurring
c. LEDSET set on SPD (speed) mode:
Lit when 1000Mbps speed is active
Off when 10/100Mbps speed is active
Page 10