Table of Contents
Advertisement
IP Range:
The switch supports two kinds of options for managed valid IP Range, including Any and
Custom. Default is Any. Custom allows you to assign an effective IP range. The valid range is
0.0.0.0~255.255.255.255.
Incoming Port:
The switch supports two kinds of options for managed valid Port Range, including Any and
Custom. The default is Any. Custom allows you select the ports that should be used and the
ports that should be restricted in the management security configuration.
Access Type:
The switch supports two options
default is Any. Http, Telnet and SNMP are three ways to access and manage the switch if
Custom has been chosen.
Action:
The switch supports two options for
default is Deny. Deny restricts access to switch management. Accept provides the authority to
manage the switch.
Edit/Create:
A new entry of Management Security Configuration can be created after the parameters as
mentioned above had been setup and then press <Edit/Create> button. Of course, the existed
entry also can be modified by pressing this button.
Delete:
Remove the existed entry of Management Security Configuration from the management
security table.
5.7
Virtual Stack
Function name:
Virtual Stack
Function description:
Virtual Stack Management (VSM) provides a simple centralized management function capable of
managing up to sixteen (16) switches. Through the proper configuration of the VSM function,
switches in the same LAN will be grouped automatically. One switch will be the master device, and
the others in the group will become the slave devices.
It is not necessary to remember the address of all the VSM devices; the manager is capable of
managing the network and all devices within the VSM stack.
VSM is only available using Web UI. With one switch functioning as the master, two rows of buttons
for the group devices will appear on the top of the Web UI. By pressing these buttons, users will be
allowed to connect to the Web UI of the devices of the group in the same window without the logging
into these devices.
The top-left button is only for the Master device (Figure 5.8). The background color of the button you
press will be changed to represent that the device is under your management.
Note: It will remove the grouping temporarily if you login the switch via the console.
Waters Network Systems
for managed valid Access Type
managed valid Action Type
2800M/MR User's Manual
, including Any and Custom. The
, including Deny and Accept. The
Page 35
Advertisement
Table of Contents
