Table of Contents
Advertisement
Displays the fiber mode, multi or singlemode.
Fiber Cable (for fiber module only):
Displays the cable type, Two Wires, Single Wire.
Wavelength (for fiber module only):
Displays the wavelength of the light transmitted in the fiber ( 850nm, 1310nm).
Distance (for fiber module only):
Displays the maximum distance the port supports (100m, 10km, 20km, etc).
Speed (for fiber module only):
Displays the maximum speed of the port, 1G or 100M.
5.8.2
Port Configuration
Port Configuration is used to change the setting of each port. Port Configuration allows you to
set or reset the functions described below.
Function name:
Port Configuration
Function description:
Used to set each port's operation mode. The switch supports three parameters for each port. They
are state, mode and flow control.
Parameter description:
State:
The communication capability of the port is Enabled or Disabled. When enabled, traffic can be
transmitted and received via this port. When disabled, the port is blocked and no traffic can be
transferred through this port. Port State is configurable by the user. If a port is set to disable, no
Waters Network Systems
Figure 5.13 – Port Configuration
2800M/MR User's Manual
Page 42
Advertisement
Table of Contents
