Connecting An Lc-Sc Cable Adapter To A Device; Lc-Sc Fibre-Channel Cable Adapter - IBM TotalStorage DS4100 Installation, User's, And Maintenance Manual

Figure 45. LC-SC fibre-channel cable adapter
The following sections provide the procedures for properly connecting and removing
an LC-SC fibre-channel cable.

Connecting an LC-SC cable adapter to a device

Complete the following steps to connect an LC-SC fibre-channel cable adapter to a
device:
Statement 3:
CAUTION:
When laser products (such as CD-ROMs, DVD drives, fiber optic devices, or
transmitters) are installed, note the following:
v Do not remove the covers. Removing the covers of the laser product could
v Use of controls or adjustments or performance of procedures other than
DANGER
1. Read the information in "Handling fiber-optic cables" on page 45.
2. Connect one end of an LC-LC cable to an SFP module in the DS4100. For
LC connector
result in exposure to hazardous laser radiation. There are no serviceable
parts inside the device.
those specified herein might result in hazardous radiation exposure.
Some laser products contain an embedded Class 3A or Class 3B laser
diode. Note the following.
Laser radiation when open. Do not stare into the beam, do not view directly
with optical instruments, and avoid direct exposure to the beam.
instructions, see "Using LC-LC fibre-channel cables" on page 49.
SC connector
Chapter 3. Cabling the storage server
53