Using Lc-Sc Fibre-Channel Cable Adapters; Lc-Lc Fibre-Channel Cable Lever And Latches; Removing The Lc-Lc Fibre-Channel Cable - IBM TotalStorage DS4100 Installation, User's, And Maintenance Manual

1. On the end of the LC-LC cable that connects into the SFP module or host bus
Figure 43. LC-LC fibre-channel cable lever and latches
2. Carefully pull on the connector to remove the cable from the SFP module, as
Figure 44. Removing the LC-LC fibre-channel cable
3. Replace the protective caps on the cable ends.
4. Replace the protective cap on the SFP module.

Using LC-SC fibre-channel cable adapters

The LC-SC fibre-channel cable adapter is a fiber-optic cable that is used to connect
an LC connector into one of the following devices that require SC connectors:
v 1-Gbps fibre channel switch
v Fibre channel host bus adapter
For more information about connecting to these devices, see the documentation
that comes with the LC-SC fibre-channel cable adapter.
52
IBM TotalStorage DS4100 Storage Server: Installation, User's, and Maintenance Guide
adapter, press down and hold the lever to release the latches, as shown in
Figure 43.
Lever
Latches
shown in Figure 44.