SOLTEK SL-85SID User Manual page 75

Chapter 4 BIOS Setup
RedStorm Press "Enter" to execute this function, by which BIOS
Overclocking Tech will defect CPU Frequency, until the unacceptable
one is reached. BIOS will then stop and reboot
automatically with the optimal CPU Frequency.
If system does not reboot after Frequency detection,
user should reboot system manually.
CPU Clock This item allows you to select the CPU clock ratio
Ratio so as to change or overclock the CPU frequency.
However, if CPU clock Ratio is locked, this function
is invalid.
Use CPU Linear This item allows you to adjust the CPU clock by
Frequency 1MHz stepping. Default CPU clock is 100MHz. Any
overclocking is taking the risk of unstabilizing the
CPU and system performance.
Choices: Default; Use linear (1MHz stepping).
CPU Clock If "Use CPU Linear Frequency" is set at "Use linear",
you can adjust the CPU clock by 1MHz stepping up
or down.
Choices: 1MHz stepping.
AGP Div Freq. This item allows you to adjust the AGP Frequency
by fraction of your CPU Host clock. Default AGP
frequency is 66MHz. The choices (fraction of CPU
clock): Default; 2/2; 2/3; 2/4; 2/5; 2/6; 2/7; 2/8.
Auto Detect PCI To reduce the occurrence of electromagnetic
CLK interference (EMI), the BIOS detects the presence
or absence of components in PCI slots and turns off
system clock generator pulses against empty slots.
hoices: Enabled (default); Disabled.
75