SOLTEK SL-85SID User Manual page 68

85SID
Video Off Method This determines the manner by which the monitor is
V/H SYNC + Blank
Blank Screen
DPMS Supports
Video Off in Suspend This determines the manner in which the monitor is
Suspend Type Select the Suspend Type.
MODEM Use IRQ Name the interrupt request (IRQ) line assigned to
Suspend Mode After the selected period of system inactivity, the
HDD Power Down When enabled and after the set time of system
Soft-Off by PWRBTN When Enabled, turning the system off by pressing
blanked. Default: V/H Sync+Blank
This selection will cause the system to turn off the vertical
and horizontal synchronization ports and write blanks to the
video buffer.
This option only writes blanks to the video buffer.
Select this option if you monitor supports the Display Power
Management Signaling (DPMS) standard of the Video Elect-
ronics Standards to select video power management values.
blanked.
The choices: Yes(default); No.
The choices: PWRON Suspend; StopGrant (default).
the modem (if any) on your system. Activity of the
selected IRQ always awakens the system.
The choices: 3 (default); 4; 5; 7; 9; 10; 11; NA.
chipset enters a hardware suspend mode, stopping
the CPU clock and possibly causing other system
devices to enter power management modes.
Choices: Enabled; Disabled (default)
inactivity, the hard disk drive will be powered down
while all other devices remain active.
Choices: Enabled; Disabled (default)
the on/off button places the system in a very low-
power-usage state.
Choices: Instant-off (default); Delay 4 sec.;
68