SOLTEK SL-85SID User Manual page 47

Step 4. Type awdflash *.bin /sn/py/cc and then press <Enter> to run
BIOS upgrade program. (*.bin depends on your mainboard model and
version code. Instead of typing "*", you should type specific file name for
your specific mainboard).
Step 5. Please press <F1> or <F10> to exit or reset your system.
Warning ! If the message " Write Fail " appears while Award
"FLASH MEMORY WRITER" is verifying Flash memory, just repeat
the process. Please DO NOT reset or turn off the system. If the
award memory flash utility is not able to update the BIOS
successfully, your system may not be able to boot up.
Step 6. You will need a message "CMOS checksum error-Default loaded"
during booting the system. Press <Del> to run CMOS setup utility, then reload
"LOAD SETUP DEFAULTS" or "Load Optimized Defaults" and save this
change.
The parameters of AWDFLASH.EXE
/sn: No original BIOS backup
/py: Program flash memory
/cc: Clear CMOS data (and update data automatically) after
programming
Users can type AWDFLASH /? to get further details about the parameters.
Incorrect usage of the parameter will damage the BIOS information, so we
strongly recommend user to leave parameters alone unless you fully understand
their function.
Chapter 4 BIOS Setup
47