SOLTEK SL-85SID User Manual page 71

Chapter 4 BIOS Setup
Reset Configuration Normally, you leave this Disabled. Select Enabled
Data to reset Extended System Configuration Data
(ESCD), when you exit Setup if you have installed
a new add-on and the system reconfiguration has
caused such a serious conflict that the operating
system cannot boot.
Resource Controlled The Plug and Play AwardBIOS can automatically
By configure all the boot and Plug and Play-compatible
devices. If you select Auto, all the interrupt request
(IRQ) and DMA assignment fields disappear, as the
BIOS automatically assigns them.
Choices: Auto(ESCD) (default); Manual)
IRQ Resources If "Resource Controlled By' is set at "Manual", this
IRQ Resources option will appear for your
configuration. Press Enter. Please refer to the list
below:
PCI/VGA Palette Snoop This option allows the BIOS to preview VGA status,
and to modify the information delivered from the
feature Connector of the VGA card to MPEG card.
This option can solve the display inversion to black
after you have used MPEG card.
Choices: Disabled (default); Enabled
PCI Slot1~3 IRQ Set to Auto, this option allows the BIOS to assign
Assigned to IRQ to PCI slot.
Choices: Auto (default); 3; 4; 5; 7; 9; 10; 11; 12; 14;
15.
71