Custom Types Menu; Universal Setup Menu - Develop ineo 3300P User Manual

Custom Types menu

Use
Custom Type [x]
Paper
Card Stock
Transparency
Rough/Cotton
Labels
Envelope
Recycled
Paper
Card Stock
Transparency
Rough/Cotton
Labels
Envelope

Universal Setup menu

Use
Units of Measure
Inches
Millimeters
Portrait Width
3–8.5 inches
76–216 mm
User's Guide
To
Associate a paper or specialty media type with a Custom Type [x] name or
a user-defined custom name created in the Embedded Web Server, in the
Local Printer Settings Utility.
Notes:
• Paper is the factory default setting for Custom Type [x].
• The specialty media type must be supported in the selected tray or
feeder in order to print from that source.
Specify a paper type when the Recycled setting is selected in other
menus.
Notes:
• Paper is the factory default setting.
• The Recycled paper type must be supported in the selected tray or
feeder in order to print from that source.
To
Identify the units of measure.
Notes:
• Inches is the US default setting.
• Millimeters is the Non-US default setting.
Set the portrait width.
Notes:
• If the width exceeds the maximum, then the printer uses the
maximum width allowed.
• 8.5 inches is the US default setting. You can increase the width in
0.01-inch increments.
• 216 mm is the Non-US default setting. You can increase the
width in 1-mm increments.
- 73 -