Reports Menu - Develop ineo 3300P User Manual

Use
Portrait Height
3–14.17 inches
76–360 mm

Reports menu

Reports menu
Use
Menu Settings Page
Device Statistics
Network Setup Page
User's Guide
To
Set the portrait height.
Notes:
• If the height exceeds the maximum, then the printer uses the
maximum height allowed.
• 14 inches is the US default setting. You can increase the height
in 0.01-inch increments.
• 356 mm is the Non-US default setting. You can increase the
height in 1-mm increments.
To
Print a report containing information about the paper loaded in trays,
installed memory, total page count, alarms, timeouts, printer control panel
language, TCP/IP address, status of supplies, status of the network
connection, and other information.
Print a report containing printer statistics such as supply information and
details about printed pages.
Print a report containing information about the network printer settings, such
as the TCP/IP address information.
Note: This menu item appears only in network printers or in printers
connected to print servers.
- 74 -