Develop ineo 3300P User Manual page 175

- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then
press twice quickly to see the supplemental light sequence.
- On
- Blinking
- Blinking
- On
If the supplemental light sequence matches the light sequence in the preceding illustration, then try one
or more of the following:
• From the printer control panel, press
Note: The printer discards any data received through the USB port.
• Set the USB Buffer to Auto:
- If the printer is on a network, then access the Embedded Web Server.
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- Print a network setup page or menu settings page, and then locate the IP address in the
TCP/IP section.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
User's Guide
to continue printing.
- 175 -