Table of Contents
Advertisement
Use
Paper Saver Border
None
Solid
Quality menu
Use
Print Resolution
300 dpi
600 dpi
1200 dpi
1200 Image Q
2400 Image Q
Pixel Boost
Off
Fonts
Horizontally
Vertically
Both directions
Isolated
Toner Darkness
1–10
Enhance Fine Lines
On
Off
User's Guide
To
Print a border when using Paper Saver.
Note: None is the factory default setting.
To
Specify the printed output resolution in dots per inch.
Note: 600 dpi is the factory default setting.
Enable more pixels to print in clusters for clarity, in order to enhance images
horizontally or vertically, or to enhance fonts.
Note: Off is the factory default setting.
Lighten or darken the printed output.
Notes:
•
8 is the factory default setting.
•
Selecting a smaller number can help conserve toner.
Enable a print mode preferable for files such as architectural drawings, maps,
electrical circuit diagrams, and flow charts.
Notes:
•
Off is the factory default setting.
•
To set this option using the Embedded Web Server, type the network printer
IP address in the Web browser address field.
- 96 -
Advertisement
Table of Contents
Need help?
Do you have a question about the ineo 3300P and is the answer not in the manual?
Questions and answers