Develop ineo 3300P User Manual page 164

Load [paper source] with [paper size] [orientation]
- On
- On
If the printer control panel light sequence matches the light sequence in the preceding illustration, then try
one or more of the following:
• Load the tray or feeder with the correct size of paper.
• From the printer control panel, press
Note: If the printer finds a tray that has the correct size of paper, then it feeds from that tray. If the
printer cannot find a tray that has the correct size of paper, then it prints from the default paper source.
From the printer control panel, press
•
User's Guide
to continue printing.
to cancel the print job.
- 164 -