Table of Contents
Advertisement
4. Push the card firmly into place as shown in the illustration.
Warning—Potential Damage: Improper installation of the card may cause damage to the card and
the controller board.
Note: The entire length of the connector on the card must touch and be flushed against the controller
board.
5. Close the controller board access door.
Note: When the printer software and any hardware options are installed, you may need to manually add
the options in the printer driver to make them available for print jobs.
User's Guide
- 24 -
Advertisement
Table of Contents
Need help?
Do you have a question about the ineo 3300P and is the answer not in the manual?
Questions and answers