Frame Care; Parts Replacement - Star Trac SPINNER 7240 Series Installation & Owner's Manual

Frame Care

It is recommended that the frame on the each Spin
the corrosion process at least once a month.
Cleaning
Using a clean terry cloth that is dampened in 30 parts water to 1 part non-abrasive detergent or car wash
soap rub over the frame of the product.
Wash/Dry
Dampen a clean terry cloth in an only water solution to wipe away any soap residue. Using a second
clean and dry terry cloth; dry off any liquid residue.
Sealing
The frame can be sealed by applying a wax or polishing coat that can help repel away liquids like human
perspiration. Apply the wax or polish per the manufacturer's instructions for best results.

Parts Replacement

Depending on the use and maintenance of the product, certain items may need to be replaced upon inspection due to wear. These
can be identified during scheduled inspections as described in the Preventative Maintenance section of this owner's manual
beginning on page 30.
Lubrication Warning
DO NOT USE ANY LUBRICATION ON THE BIKES BELT DRIVE TRAIN. THE USE OF LUBRICATION ON THE BIKES BELT
DRIVE TRAIN WILL DRAMATICALLY AFFECT THE FUNCTION OF THE BIKE AND VOID THE BIKES WARRANTY.
SPINNER BLADE BELT BIKE MANUFACTURED by STAR TRAC - OWNER'S MANUAL |
®
bike is sealed from sweat impurities that may speed
33