Lan - NetComm HSPA+ M2M User Manual

Hspa+ m2m wifi router m2m series

Hide thumbs Also See for HSPA+ M2M:

Table of Contents

LAN

IP Setup

The IP Setup page is used to configure the LAN Settings of the router and to enable or disable DNS Masquerade.

The default IP of the Ethernet port is 192.168.1.1 with subnet mask 255.255.255.0. To change this, enter the new IP Address

and/or Subnet mask and click "Save".

Please note: If the IP address has changed you will have to re-enter the new IP address configured in your browser to

access the configuration pages.

DNS Masquerading

DNS masquerading allows the router to forward DNS requests to dynamically assigned DNS servers. Clients on the router's LAN

can then use the router as a DNS server without needing to know of the dynamically assigned DNS servers assigned by the cellular

network.

There should be no need to disable this feature in most cases, however, if you need to do so simply select "Disable" and click the

Save button.

NTC-40 –HSPA+ M2M WiFi Router with Voice

Figure 20 - IP Setup Settings

NTC-40 Series – HSPA+ M2M WiFi Router

www.netcommwireless .com

YML40V

Table of Contents