Rj-45 Connector; Captive Power Terminal Block; Electrical Specifications; Environmental Specifications / Tolerances - NetComm HSPA+ M2M User Manual

RJ-45 Connector

The following table lists the pin outs for the RJ-45 Ethernet connector.

Captive Power Terminal Block

The following table displays the pin outs for the Locking Power Block on the DC adapter.

Electrical Specifications

The NTC-40 is capable of operating over a wide range of input voltages from 8 ~ 28V.
It is recommended that the NTC-40 be powered using the supplied DC-in power supply.

Environmental Specifications / Tolerances

The industrial enclosure of the NTC-40 makes it able to operate over a wide variety of temperatures from -10˚C to +65˚C.
YML40V
www.netcomm-commercial.com.au
Pin: 1 8
Figure 67 - The RJ-45 Connector
PIN SIGNAL DESCRIPTION
1 TX+ Transmit Data+
2 TX- Transmit Data-
3 RX+ Receive Data+
4 Unused Unused
5 Unused Unused
6 RX- Receive Data-
7 Unused Unused
8 Unused Unused
Table 37 - RJ-45 Connector Pin Outs
Figure 68 - Locking Power Terminal Block
PIN SIGNAL DESCRIPTION
+ V+ Voltage+
- V- Voltage-
Table 38 - Locking Power Block Pin Outs
NTC-40 Series – HSPA+ M2M WiFi Router
NTC-40 –HSPA+ M2M WiFi Router with Voice
67