Web Based User Interface - NetComm HSPA+ M2M User Manual
Hspa+ m2m wifi router m2m series
Hide thumbs
Also See for HSPA+ M2M:
- User manual (89 pages) ,
- White paper (15 pages) ,
- User manual (16 pages)
Table of Contents
Advertisement
Web based User Interface
To log in to the management console and view the status and make changes to your NTC-40, please follow the steps below:
1.
Open your web browser (e.g. Internet Explorer/Firefox/Safari) and navigate to http://192.168.1.1
2.
Enter the username and password configured during the first time setup and click the "Submit" button. The default
username and password is "admin" if the details haven't been customized. Click the "Submit" button to continue.
After logging in, the Status page should then be displayed.
NTC-40 –HSPA+ M2M WiFi Router with Voice
14
Figure 6 - Login prompt for the Web based User Interface
NTC-40 Series – HSPA+ M2M WiFi Router
www.netcommwireless .com
YML40V
Advertisement
Table of Contents
