NetComm HSPA+ M2M User Manual page 49

Hspa+ m2m wifi router m2m series
Hide thumbs Also See for HSPA+ M2M:
Table of Contents

Advertisement

NTC-40 Series – HSPA+ M2M WiFi Router
Table 26 - SMS Setup Configuration Items
Incoming text messages can be redirected to another mobile device and/or a TCP/UDP message server.
The following page details the options available via the SMS function.
Redirect To Mobile
You can forward incoming text messages to a different destination number. This destination number can be another mobile phone
or 3G router phone number. To disable the feature, simply delete the number in the 'Redirect To Mobile" field and click the "Save"
button.
For Example:
If someone sends a text message and "Redirect to Mobile" is set to "0412345678", this text message is stored on the router and
forwarded to "0412345678" at the same time.
Redirect to TCP & TCP Port, Redirect to UDP & UDP Port
You can also forward incoming text messages to a TCP/UDP based destination. The TCP or UDP server can be any kind of public
or private server if the server accepts incoming text-based message.
The TCP/UDP address can be an IP address or domain name. The port number range is from 1 to 65535. Please refer to your
TCP/UDP based SMS server configuration for which port to use.
For Example:
If someone sends a text message and "Redirect to TCP" is set to "192.168.20.3" and "2002", this text message is stored in the
router and forwarded to "192.168.20.3" on port "2002" at the same time.
SMS Configuration for Remote Diagnostics
Enable Remote Diagnostics
Enable or disable the Remote Diagnostics feature. If this setting is enabled all incoming text messages are parsed and tested for if
they contain Remote Diagnostics commands.
If Remote Diagnostics commands are found, the router executes those commands. This feature is disabled by default.
Please note: It is possible to adjust settings and prevent your router from functioning correctly. If this occurs, you will need
to perform a factory reset in order to restore normal operation.
It is highly recommended to enable security when utilising this feature.
NTC-40 –HSPA+ M2M WiFi Router with Voice
YML40V
www.netcomm-commercial.com.au
49

Advertisement

Table of Contents
loading

Table of Contents