Status - NetComm HSPA+ M2M User Manual

Status

The status page provides system related information and is displayed when you login to the NTC-40 management console. By
default, the status page will show System Information, Ethernet Port Status, WWAN Status, IPSec Status and the 3G service
connection details.
ITEM
System Uptime The current uptime of the router.
Router Version The firmware version running on the router.
Phone Module The type of phone module and the firmware version of the module.
Serial Number The serial number (MAC Address) of the router.
Ethernet Port Status The current speed and status of the Ethernet port.
WWAN The current connection profile, Interface, status, APN, local and remote addresses of the WWAN connection.
Provider The current 3G service provider detected.
Coverage The type of 3G connection available for use.
IMEI The IMEI (International Mobile Equipment Identity) of the router, a unique code for identifying devices on a GSM network.
Frequency The frequency band currently in use.
Signal Strength The strength of the 3G signal detected
SIM Status The status of the SIM currently inserted into the router.
To view the LAN, PPPoE or PPTP status individually, click on their relevant links below the green menu bar. To view them all, click
on the All Status link.
YML40V
www.netcomm-commercial.com.au
Figure 7 - The Status Page
DEFINITION
Table 10 - Status page items
Figure 8 - Status Page - LAN Details
NTC-40 Series – HSPA+ M2M WiFi Router
NTC-40 –HSPA+ M2M WiFi Router with Voice
15