Table of Contents
Advertisement
Status
The status page provides system related information and is displayed when you login to the NTC-30WV management console. By
default, the status page will show System Information, Ethernet Port Status, WWAN Status, IPsec Status and the 3G service
connection details.
ITEM
System Uptime
Router Version
Phone Module
MAC Address
Ethernet Port Status
WWAN
IPsec
Provider
Coverage
IMEI
Frequency
Signal Strength
SIM Status
To view the LAN, PPPoE or PPTP status individually, click on the links below the green menu bar. To view them all, click on the All
Status link.
www.netcommwireless.com
Figure 13 - The Status Page
The current uptime of the router.
The firmware version running on the router.
The type of phone module, the firmware version of the module and the current module temperature.
The MAC Address of the router which serves as a unique identifier of network devices.
The current speed and status of the Ethernet port.
The current connection profile, Interface, status, APN, and local address of the WWAN connection.
The current connection profile, Interface, status, Local LAN address, Remote Gateway address, Remote LAN address
and the status of the IPsec connection. If none are configured, this should be empty.
The current 3G service provider detected.
The type of 3G connection available for use.
The IMEI of the router.
The frequency band currently in use.
The strength of the 3G signal detected
The status of the SIM currently inserted into the router.
Table 14 - Status page items
DEFINITION
NTC-30WV – Outdoor HSPA+ WiFi Router with Voice
19
Advertisement
Table of Contents
