Log In Using Sim Service; Confirm Connection Status - NetComm NTC-402 Configuration Manual

24 Then type: ipconfig /renew
25 Press the Enter button.
26 The connection will be renewed.

Log in Using SIM Service

27 Open a browser and type into the address box: 10.30.4.1
28 Log in as usual.

Confirm connection status

29 Go to Status > Basic Network and open the WAN & Uplink tabbed page.
30 Go to the WAN Interface IPv4 Network Status section to confirm that you are connected to the Telstra
network using the correct IP Address, etc.:
NTC-402 – Telstra Private IP WAN Configuration Guide
CG01068 v. 1.0 October 2018
Figure 9 – Command Prompt: ipconfig /renew
Figure 10 – Log in to URL 10.30.4.1
Figure 11 – WAN Interface IPv4 Network Status
11 of 11
© NetComm Wireless 2018