Table of Contents
Advertisement
7.4 Locking user access (CF06)
Important: Before activating the user locking feature,
select the required operating mode (
).
: Les touches sont verrouillées.
Only the set-point configured before
the locking operation can be changed
to +/- 3°C (except for the
: Active buttons (default display).
Make the selection by the buttons
Confirm by pressing and releasing
Go on to the next menu.
and
modes).
or
.
- 12 -
7.5 Choosing the installation type (CF07)
This menu is used to determine the type of
installation so that the most suitable regulation
settings are used.
: Underfloor heating application - P.I. type
regulation (default display)
: Ceiling heating application - P .I. type regulation
Paramètre disponible si choix sonde interne §7.2
Select by pressing the buttons
,
confirm by pressing and releasing
Go on to the next menu.
7.6 Gradual heating (CF09)
CF09 is displayed.
: Start-up program 1 (dry floor).
: Start-up program disabled
Select by pressing the buttons
confirm by pressing and releasing
or
, and
.
or
, and
.
- 13 -
Hide quick links:
Advertisement
Table of Contents
