Warnings
• Carefully read these instructions prior to
installation.
• The unit must be installed in compliance with
currently applicable standards.
• Always switch off the mains before installing or
servicing the unit.
• Do not attempt to repair the unit yourself; an
after-sales service is available.
• The diagrams provided are simplified for
greater clarity. The protective units and other
accessories required by the standards are not
illustrated.
Standard UTE NF C15-100 and good practice
must be complied with. Connected or nearby
equipment must not generate excessive
interference (directive 2004/108/EEC).
- 2 -
1- Contents
1 - Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 3
2.1 Pilot wire principle (GIFAM standard) . . . 5
3 - Location . . . . . . . . . . . . . . . . . . . . . . . . . . 6
- 3 -