Lower End Components Reassembly - HYOSUNG RX 125 Service Manual

LOWER END COMPONENTS REASSEMBLY

CRANKSHAFT
● Inspect the between the webs referring to the
below figure when rebuilding the crankshaft.
Width between webs
53.0 ± 0.1 mm
Standard 53.0±0.1 mm
● When mounting the crankshaft in the crankcase,
it is necessary to pull its left end into the
crankcase.
Crankcase installer : 09910-32812
Conrod holder : 09910-20116
ENGINE 3-38